AA LH-30 is a water soluble screen wash designed for the removal of all inks, including plastisol and UV inks. LH-30 works especially well on tough inks such as: water base, vinyl, epoxy and enamels. LH-30 can also be used for the removal of stubborn cured ink stains (ghost/image).
MANUALLY: Card excessive ink from the screen. Spray or apply manually to the ink side of the screen. Agitate both sides of the screen with a non-abrasive brush or pad and allow product to penetrate. Starting at the bottom of the screen, rinse off all residue with high pressure water.
RE-CIRCULATING: Card excessive ink from the screen. LH-30 can be continuously re-circulated until product becomes too heavily soiled with solids. Used products may be filtered and reused.
CURED INK REMOVER (STAIN): Remove the ink and emulsion from the screen. Spray or apply manually to both sides of the screen. Scrub both side of the screen with a non-abrasive brush or pad. Allow product to remain on the screen for a minimum of 3 minutes. Starting at the bottom of the screen, high pressure water rinse both sides of the screen into the drain.